Detailed Product Description

The Generator controller Minco A1 utilizes high performance microprocessor and industrial grade . It has the property of compact structure, easy installation and complete functions. The controller can control the generating set to start or stop, monitor the working state of generating set, and achieve the auto-protection function. ATS control function. Minco A1 is a economical auto start and auto-protection control module.

II. Characteristics

1.  MINCOA1 has passed the UL certificate.

2.  LED display: frequency, battery voltage, running time, fault code

3.  Auto start, Auto protection, ATS control.

4.   Setting all working parameters by pushbutton menu.50/60HZ optional. Delayed start and delayed stop can be set.

III. Performance

1.  LED display:

    State indication: Start, auto, power supply, running indication 

     Fault indication:  Emergency  stop, over speed, low battery voltage, high coolant temp, low 

     oil pressure, low fuel level, over crank, loss of the speed signal

2.  Switch inputs (Photoelectric isolator, connecting with GND is valid):

     Emergency stop, remote start, remote reset, high coolant temp, low oil pressure, low fuel 

     level

3.  Relay outputs (relay isolation):

     Start, Fuel (Fuel supply/stop), fault,  pre-fuel/pre-heating, excitation, idle

IV. External Features

1.  Dimension: Front panel (L×WxD) 96×96x9 mm                      

     Back panel (L×WxD) 84×84x50 mm

     Mounting hole: (L×W) 85×85 mm    

2.  Power Supply: DC8-36 V

3.  Working environment: -25~70^oC

     Relative humidity <95%

4.  N.W.: 300g