Detailed Product Description

I. Description

The Minco A1 Auto-start and Auto-protection control module utilizes high performance microprocessor and industrial grade devices. It has the property of compact structure, clearly display and easy operation. The controller can control the generator to start or stop, detect and measure the work state of the generator, and achieve the auto-protection function. ATS control function. MINCO A1 is an economical auto start and auto protection control module.
 

II. Characters

1. MINCOA1 has passed the UL certificate.

2. LED displayed the frequency, battery voltage, running time, fault code

3. Auto start, Auto protection, ATS control

4. Key press setting menu for all working parameters,50/60HZ currency

5. Can be delayed start and delayed stop.

III. Performance

1. LED display:

    State indicate: Start, Auto, Power supply, Running indicate

    Fault indicate: Emergency stop, over speed, low battery voltage, high 

water temp, low oil pressure, low fuel level, over crank, speed signal loss. 

2. Switch input( Photoelectric insulate, valid when connect with GND)

    Emergency stop, remote start, remote reset, high water temp, low oil

    pressure, low fuel level

3. Relay output(relay insulate): Start, Fuel (Fuel supply/stop), fault, pre-Fuel/pre-heated, excitation, Idle

IV. Appearance Features

1. Dimension:   Front panel (L x WxD) 96 x 96x9 mm       

                       Back panel (L x WxD)  84 x 84x50 mm

                       Mounting hole (L x W)  85 x 85mm 

2. Power Supply   DC8-36 V

3. Working environment  -25~70 ^oC,

    relative humidity  <95%

4. N.W.:200g